Table of Contents
Is your TP-Link repeater not providing you with the internet speed you need? Has the speed of your WiFi connection slowed down recently? If you answered yes to even one of these questions, then you should upgrade your TP Link’s firmware as soon as possible. Fixing bugs, adding new security features, and improving overall performance are all benefits of updating the firmware of your wireless repeater.
If you have a TP-Link wireless repeater, read on to learn how to update its firmware.
Firmware Upgrades for TP-Link Repeaters
A wall outlet can now power your TP-Link repeater.
- Press the Power Button.
- Get your hands on an Ethernet cable now.
- Your router and repeater should be connected using two Ethernet cables.
- It is possible to connect your devices wirelessly if you so desire.
Turn on the computer
- It’s time to switch to a new browser.
- Your TP-Link repeater needs the latest firmware.
- Open a new tab in your web browser to see what’s new.
- Type tplinkrepeater.net in the address bar of your web browser.
- Click on “Enter.”
- You’ll be taken to the repeater’s official login page.
- Type in the default username and password and press the Log In option to log in.
- The Quick Setup wizard will greet you as soon as you arrive.
- Go to the Settings section of the app.
- To update your system’s firmware, go to the System Tools menu and select Firmware Update.
- To upload a file, click Browse, then Upload.
- Once your TP-Link wireless repeater’s firmware has been updated, it will be ready for use.
- The troubleshooting hacks listed below can help you if you encounter any difficulties during the process.
Firmware Update Failed on my TP-Link Repeater
The TP-Link Repeater Must Be Rebooted.
One of the most common reasons TP-Link firmware updates fail is technical difficulties. Restarting your wireless repeater is all that is required to get rid of these problems.
Make sure you follow the instructions below to reboot your device.
- Unplug your TP-Link repeater from the wall socket and turn it off.
- Wait a little while longer.
- Reconnect your TP-Link repeater to the wall socket and power it back up once again.
- Try updating your TP-Link repeater’s firmware now.
- Make sure your Ethernet is working.
The Ethernet connection between your TP-Link repeater and router should be checked if you are still unable to perform the firmware update. We recommend that you get a new one if you find any cuts on your old one. When re-establishing the connection between your devices, make certain that it is not slack.
Your WiFi devices should be closer to each other.
If your TP-Link wireless repeater is too far away from your home router, you may have trouble updating the firmware on your repeater.
In other words, place your repeater and router in the same room if possible. If you don’t, you’re going to run into a lot of problems down the road.
Be Certain You’re Using the Correct Login Information
Your TP-Link repeater’s firmware must be updated by accessing the Quick Setup wizard with the correct login credentials. As a result, if you haven’t taken care of this, you now know why you’re in this situation.
As a result, be sure to use the correct TP Link extender login credentials whenever necessary. Please consult the user manual that came with your device at the time of purchase if you have any doubts.
Avoid Interference with Signals
It’s also a good idea to keep your TP-Link repeater away from cordless phones, baby monitors and Bluetooth speakers, and mirrors and fish tanks. Also avoid placing your repeater near TV’s, refrigerator and microwave ovens, as well as aluminum studs.
Avoid mounting your wireless repeater in a corner or close to a solid concrete wall, as these are poor locations for it.
After following these troubleshooting steps, TP-Link repeater firmware update to the latest version should be attempted.
In a nutshell:
This post on how to update the firmware on TP-Link extenders has come to an end. After following the above instructions, we are confident that you will be able to successfully update your device. That’s not all; we also hope that your wireless device is now providing you with the internet speed you need.